ZS Multi Surface Suction Car Mount has a 17mm ball fitting which snaps
directly into any of the Garmin Nuvi SatNav holding cradles.
If your original Garmin suction cup arm is failing, replace it with the new ZS
arm. The ZS Multi-Surface arm will hold to almost any flat surface within your
vehicle. It adheres with ease to dashboards, console areas and glass and offers
a reliable holder for your Garmin.
SO EASY - NO NEED FOR ADDITIONAL DASH DISCS or FRICTION MOUNTS.
Simply snap on your own Garmin holding cradle and apply directly to the
dashboard / console. View your Garmin conveniently within your line of sight or
apply to the windscreen in the traditional way for a really FIRM grip to glass.
The ZS Multi Surface Mount uses a special PU coated 60mm suction cup which
although tacky to touch is NOT adhesive. When used in conjunction with the
trusted lever release arm it offers outstanding versatility.
The 60mm low level arm is neat and unobtrusive.
Designed to be used with YOUR OWN CRADLE-NO NEED TO REPLACE THE WHOLE MOUNT IF
YOUR SUCTION CUP IS FAILING.
How to apply:.
Snap on your Garmin holding cradle.
Select your chosen position, ensure it is clean, dust free.
Remove the protective film from the sucker.
Position the ZS arm pull down the lever to expel the air and create the vacuum.
Give it a wiggle to ensure it's holding firm then insert your SatNav.
To remove; Just lift the lever and pull on the release tab to break the
vacuum. The ZS mount can now be removed
NOTE: Please do not just pull the mount off the surface, you WILL damage it.
Washable; Although your car is properly spotless dust, fluff & grease can build
up on the suction cup causing the suction to fail. If this happens simply rinse
the sucker under a running tap & leave to air dry.
Not suitable for oiled areas, loose covered dashboards or areas cleaned with wax
or grease treatments.
